The Huawei Certified ICT Expert (HCIE R&S) course targets enterprise network engineers involved in design and maintenance, as well as professionals who wish to develop an in-depth knowledge of routing, switching, network efficiency and optimization technologies. HCIE R & S consists of three units namely; Implementing Enterprise Routing and Switching Network (IERS), Improving Enterprise Network Performance (IENP), and Implementing Enterprise Network Engineering Project (IEEP), which includes advanced IPV4 routing and switching technology principles, network security, high availability and QoS, as well as application of the covered technologies in Huawei products.
1.1.1 STP (Huawei Documentation: STP)
1.1.2 RSTP (Huawei Documentation: STP/RSTP Configuration)
1.1.3 MSTP (Huawei Documentation: MSTP Configuration)
1.1.4 Loop guard (Huawei Documentation: Configuring Loop Protection on a Port)
1.1.5 Root guard
1.1.6 BPDU guard (Huawei Documentation: BPDU Protection)
1.1.7 TC-BPDU attack guard
1.2.1 Access port (Huawei Documentation: Configuring a VLAN Based on Ports)
1.2.2 Trunk port
1.2.3 Hybrid port (Huawei Documentation: Hybrid Port)
1.2.4 QinQ (Huawei Documentation: QinQ Configuration)
1.2.5 Vlan Aggregation (Huawei Documentation: VLAN Aggregation Configuration)
1.2.6 Mux VLAN (Huawei Documentation: MUX VLAN Configuration)
1.2.7 Voice VLAN (Huawei Documentation: Voice VLAN Configuration)
1.3.1 Local Bridging (Huawei Documentation: Local Bridging)
1.3.2 Remote Bridging (Huawei Documentation: Remote Bridging)
1.3.3 Integrated Bridging and Routing (Huawei Documentation: Integrated Bridging and Routing)
1.3.4 VLAN ID Transparent Transmission (Huawei Documentation: VLAN ID Transparent Transmission)
1.4.1 Link Aggregation (Huawei Documentation: Link Aggregation Configuration)
1.4.2 LACP (Huawei Documentation: LACP)
1.5.1 Speed and duplex (Huawei Documentation: Configuring the Duplex Mode)
1.5.2 Ethernet, Fast Ethernet, Gigabit Ethernet, 10GE, 40GE, 100GE
1.5.3 Auto MDI/MDIX (Huawei Documentation: Configuring the MDI Type)
1.5.4 Auto negotiation (Huawei Documentation: Configuring Auto-Negotiation)
1.5.5 Storm control (Huawei Documentation: Storm Control, Configuring Storm Control)
1.5.6 Unicast flooding control
2.6.1 Tunnel techniques (Huawei Documentation: Configuring a Tunnel Interface)
2.6.2 Translation techniques
2.7.1 Standard OSPF areas (Huawei Documentation: OSPF )
2.7.2 Stub area (Huawei Documentation: Configuring an OSPF Stub Area)
2.7.3 Totally stubby area
2.7.4 NSSA (Huawei Documentation: OSPF NSSA)
2.7.5 Totally NSSA
2.7.6 LSA types (Huawei Documentation: OSPF LSA Format)
2.7.7 Adjacency on a point-to-point and on a multi-access network
2.7.8 Virtual-Link (Huawei Documentation: OSPF Virtual Link)
2.7.9 LSA Filter (Huawei Documentation: ospf filter-lsa-out)
2.8.1 NSAP (Huawei Documentation: Basic Concepts of IS-IS)
2.8.2 IS-IS Link-state packets (Huawei Documentation: Basic Protocols of IS-IS)
2.8.3 IS-IS area type
2.8.4 IS-IS circuit type (Huawei Documentation: isis circuit-type)
2.8.5 IS-IS TLV (Huawei Documentation: IS-IS Wide Metric)
2.8.6 IS-IS DIS and Pseudo node (Huawei Documentation: Configuring IS-IS DIS Election)
2.8.7 IS-IS SPF
2.8.8 IS-IS LSP
2.8.9 IS-IS Metric (Huawei Documentation: IS-IS Wide Metric)
2.8.10 IS-IS Route Leaking (Huawei Documentation: IS-IS Route Leaking)
2.8.11 IS-IS MT (Huawei Documentation: IS-IS MT)
2.8.12 IS-IS Fast Convergence (Huawei Documentation: IS-IS Fast Convergence)
2.8.13 IS-IS LDP Synchronization (Huawei Documentation: Configuring LDP-IGP Synchronization)
2.8.14 IS-IS Authentication (Huawei Documentation: isis authentication-mode)
2.9.1 IBGP and EBGP (Huawei Documentation: Commissioning IBGP Routes)
2.9.2 BGP attributes (Huawei Documentation: Configuring BGP Route Attributes)
2.9.3 BGP synchronization (Huawei Documentation: OSPF-BGP Synchronization)
2.9.4 BGP routes Summarization (Huawei Documentation: Configuring BGP Route Summarization)
2.9.5 Route Dampening (Huawei Documentation: Route Dampening)
2.9.6 BGP route reflector (Huawei Documentation: Route Reflector)
2.9.7 BGP Community (Huawei Documentation: Community Attribute Applications in BGP)
2.9.8 BGP Peer Groups (Huawei Documentation: Configuring a BGP Peer Group)
2.9.9 BGP Security (Huawei Documentation: BGP Security)
2.9.10 Principles of Route Selection (Huawei Documentation: Routers and Routing Principles)
2.10.1 Filtering (Huawei Documentation: Configuring a Route-Filter)
2.10.2 IP Prefix list (Huawei Documentation: IP Prefix List)
2.10.3 Route Import(redistribution)
2.10.4 Route policy (Huawei Documentation: Configuring a Route-Policy)
2.10.5 Summarization (Huawei Documentation: Configuring BGP Route Summarization)
2.10.6 Preference
2.10.7 Other advanced features
3.1.1 MPLS network component (P, PE, CE) (Huawei Documentation: Commissioning Multicast VPN)
3.1.2 MPLS label format (Huawei Documentation: MPLS Label)
3.1.3 MPLS label encapsulation
3.1.4 MPLS label stack
3.1.5 MPLS label operation
3.1.6 Forwarding Equivalence Class (Huawei Documentation: MPLS Label)
3.1.7 LDP (Huawei Documentation: MPLS LDP Configuration)
3.1.8 Label advisement model
3.1.9 MPLS LDP—Local Label Allocation Filtering
3.1.10 MPLS LDP Inbound/outbound Label Binding Filtering (Huawei Documentation: Outbound and Inbound LDP Policies)
3.2.1 MP-IBGP VPNv4 peering (Huawei Documentation: Configuring Route Reflection for BGP VPNv4 Routes)
3.2.2 VPN-instance (Huawei Documentation: Configuring a VPN Instance)
3.2.3 Route Distinguisher (Huawei Documentation: route-distinguisher)
3.2.4 Route Target (Huawei Documentation: Configuring a Route Target Set)
3.2.5 Route Target import/export
3.2.6 PE-CE–Dynamic Routes (Huawei Documentation: Configuring Route Exchange Between PE and CE Devices)
3.2.7 PE-CE–Static Routes
3.2.8 Redistributing PE-CE routes into VPNv4
4.1.1 Multicast distribution tree (Huawei Documentation: Multicast Route Management (IPv4) Configuration)
4.1.2 Multicast forwarding (Huawei Documentation: Multicast Routing and Forwarding)
4.1.3 Multicast RPF (Huawei Documentation: RPF Check)
4.1.4 PIM sparse mode (Huawei Documentation: Configuring IPv4 PIM-SM)
4.1.5 IGMP/MLD (Huawei Documentation: Overview of MLD)
4.1.6 IGMP Snooping/MLD Snooping (Huawei Documentation: Overview of MLD Snooping)
4.1.7 PIM RP, and BSR (Huawei Documentation: Configuring a BSR RP)
4.1.8 Multicast tools, features, and source-specific multicast (Huawei Documentation: PIM-SM (SSM Model))
5.6.1 Static NAT/NAPT (Huawei Documentation: NAT)
5.6.2 Dynamic NAT/PAT
5.6.3 Easy IP (Huawei Documentation: Configuring Easy IP for NAT)
5.6.4 NAT Server
5.6.5 Twice NAT (Huawei Documentation: Configuring Twice NAT)
5.6.6 ALG (Huawei Documentation: NAT ALG)
5.6.7 NAT Mapping (Huawei Documentation: NAT Filtering and NAT Mapping)
6.1.1 Classification (Huawei Documentation: Quality of Service (QoS))
6.1.2 Traffic Policing (Huawei Documentation: Traffic Policing)
6.1.3 Traffic Shaping (Huawei Documentation: Traffic Shaping)
6.1.4 Congestion Avoidance (Huawei Documentation: Congestion Avoidance)
6.1.5 Congestion Management (Huawei Documentation: Congestion Management)
7.1.1 Syslog
7.1.2 IP Service Level Agreement SLA (Huawei Documentation: SLA Management)
7.1.3 NetStream (Huawei Documentation: Overview of NetStream)
7.1.4 NQA (Huawei Documentation: NQA Configuration)
7.1.5 SNMP (Huawei Documentation: SNMP)
7.1.6 FTP
7.1.7 Telnet (Huawei Documentation: Configuring Telnet Login, Telnet and SSH)
7.1.8 SSH (Huawei Documentation: Enabling the SSH Server Function, Telnet and SSH)
8.1.1 VRRP (Huawei Documentation: Overview of VRRP)
8.1.2 VGMP
8.1.3 Interface Backup (Huawei Documentation: Interface Backup)
8.1.4 NTP (Huawei Documentation: NTP Configuration)
8.1.5 DHCP (Huawei Documentation: DHCP Configuration)
8.1.6 BFD (Huawei Documentation: BFD Configuration)
8.1.7 NSF/GR
8.1.8 NSR (Huawei Documentation: Overview of NSR
9.1.1 Strategy of SDN/NFV
9.1.2 SDN architecture
9.1.3 VXLAN (Huawei Documentation: VXLAN)
9.1.4 EVPN (Huawei Documentation: EVPN Configuration)
